VUE AWD L4-2.2L VIN D (2005)
Fluid Pressure Sensor/Switch: Service and Repair
5AT
4TH Clutch Pressure Switch Replacement
4th Clutch Pressure Switch Replacement
Removal Procedure
1. Remove the battery tray.
2. Disconnect the wiring harness from the 4th clutch pressure switch.
3. Remove the 4th clutch pressure switch and washer.
Installation Procedure
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the 4th clutch pressure switch and washer.
^
Tighten the input speed sensor bolt 20 Nm (14 ft. lbs.).
2. Connect the wiring harness to the 4th clutch pressure switch.
3. Install the battery tray.
3RD Clutch Pressure Switch Replacement