VUE AWD L4-2.2L VIN D (2005)
Shifter A/T: Service and Repair
5AT
Shift Control Replacement
^
Tools Required
-
J 36346 Fascia Retainer Remover
Removal Procedure
1. Important: All shifter cable and park lock cable clips are one time usage only. Any service repair requiring cables to be disconnected from the
transaxle control cable bracket or shiftier assembly will require a cable clip replacement.
Disable the SIR system. Refer to Restraint Systems Disabling and Enabling Zone 8 in Restraint Systems.
2. Remove the console.
3. Using the J 36346, disconnect the shifter cable from the control assembly pin.
4. Remove the shifter cable retainer clip and remove the cable from the control assembly. Discard the clip.
5. Disconnect the park lock cable assembly from the pin on the control assembly.
6. Depress the tab on the park lock cable and remove the cable from the control assembly. Discard the park lock cable clip.