VUE AWD L4-2.2L VIN D (2005)
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the flywheel and the new flywheel-to-crankshaft bolts. Hand start the bolts.
2. Tighten the flywheel-to-crankshaft bolts in a crisscross pattern.
^
Tighten the bolts to 53 Nm plus 25 degrees (39 ft. lbs.) plus 25 degrees.
3. Important: Ensure that the straps on the clutch pressure plate fit into the slots on the flywheel, flexplate.
Install the clutch disc and the clutch pressure plate assembly to the flywheel.
4. Loosely install the clutch pressure plate bolts.
5. Install the J 43482 in the clutch disc and push in until it bottoms out in the crankshaft.
