VUE AWD L4-2.2L VIN D (2005)
Transmission Position Switch/Sensor: Service and Repair
Park/Neutral Position Switch Replacement
^
Tools Required
-
J 36346 Fascia Retainer Remover
-
J 44810 Transaxle Range Switch Alignment
Removal Procedure
1. Caution: Do not tip the battery over a 45 degree angle or acid could spill causing serious personal injury.
Important: Record all pre-set radio stations.
Remove the battery.
2. Loosen the battery tray bracket screws and remove the battery tray bracket.
3. Apply the parking brake and place the control shift lever in (N) Neutral.
4. Important: The transaxle manual shaft must be in (N) Neutral position prior to re-installing the range switch.
Using the Fascia Retainer Remover J 36346, remove the control cable assembly from the transaxle range switch lever.
5. Disconnect the electrical connectors from the transaxle range switch.