VUE AWD L4-2.2L VIN D (2005)
4. Secure the control valve body assembly to the transmission case assembly with the 15 black bolts.
^
Tighten the 15 black bolts in three separate steps in the sequence shown.
1. Tighten to 5 Nm (4 ft. lbs.)
2. Tighten to 10 Nm (7 ft. lbs.)
3. Tighten to 15 Nm (11 ft. lbs.)
5. Important: Note the orientation of the manual valve before connecting the manual valve link assembly.
Connect the manual valve link assembly to the manual valve.
6. Install the manual shaft detent assembly and bolt on the control valve body assembly.
