VUE AWD L4-2.2L VIN D (2005)
16. Align the following items while latching:
16.1.
The wheel drive shaft outboard seal (1)
16.2.
The CV joint outer race
16.3.
The large seal retaining clip (2)
17. Using the SA9203C (1), latch the large seal retaining clamp (2). Ensure that the latching tangs are fully engaged in the large seal clamp band.
18. Remove the wheel drive shaft from the bench vise.
19. Distribute the grease within the outer CV joint by rotating the joint in a circular motion four to five times.
