VUE AWD L4-2.2L VIN D (2005)
Transmission Mount: Service and Repair
Transmission Mount Replacement - Rear
Transmission Mount Replacement - Rear
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the transmission mount through bolt.
3. Remove the frame to transmission mount bolts.
4. Remove the transmission mount.
Installation Procedure
1. Install the mount to the frame.
^
Tighten the frame to transmission mount bolts to 50 Nm (37 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the transmission mount through bolt.
^
Tighten the bolt to 110 Nm (81 ft. lbs.).
3. Lower the vehicle.
4. Perform the powertrain mount balance procedure.