VUE AWD L4-2.2L VIN D (2005)
Fluid Pressure Sensor/Switch: Service and Repair
4T40-E/4T45-E
Transmission Fluid Pressure (TFP) Manual Valve Position Switch Replacement
Removal Procedure
1. Remove the transmission side cover.
2. Remove the six bolts from the TFP switch assembly.
3. Remove the TFP switch assembly from the control valve body assembly. The seven pressure switch O-rings are reusable and should remain with
the TFP switch assembly.
Installation Procedure
1. Install the TFP switch assembly to the control valve body assembly. The seven pressure switch O-rings are reusable and should remain with the
TFP switch assembly.
2. Notice: Install the six bolts to the TFP switch assembly.
Tighten the bolts to 12 Nm (9 ft. lbs.).
3. Install the transmission side cover.
