VUE AWD L4-2.2L VIN D (2005)
Important: Grease the seal lips in order to protect the seal and to ease in assembly. Coat bolt threads with sealant.
10. Install the side cover (1) and bolts (2 and 3) to the housing.
-
Tighten the side cover bolts to 37 Nm (27 ft. lbs.).
11. Install the drain plug. Apply sealant to the threads.
-
Tighten the drain plug 24 Nm (18 ft. lbs.).
12. Fill the transfer case with fluid, after it is installed in the vehicle, to the bottom of the fill plug hole, or 540 ml (18.2 oz).
13. Install the fill plug. Apply sealant to the threads.
-
Tighten the fill plug 15 Nm (11 ft. lbs.).
