VUE AWD L4-2.2L VIN D (2005)
1. Align the outer belt seal fastener location with the hole in the door structure and outer panel retaining tabs.
2. Starting at the rear of the belt seal, push the belt seal down onto the flange until fully seated.
3. Install the outside rearview mirror. Refer to Mirror Replacement See: Body and Frame/Mirrors/Service and Repair
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the outer belt seal retaining screw.
Tighten the screw to 2 N.m (18 lb in).