VUE AWD V6-3.5L (2007)
3. Install the brake pedal assembly into the vehicle, while guiding the brake pedal bracket pilot bushings into the foam insulator panel.
4. Install the brake pedal bracket-to-steering column bracket bolt.
Tighten the bolt to 25 N.m (18 lb ft).
5. Loosely install the brake booster mounting nuts.
6. Apply a thin coating of lithium grease to the pushrod pin on the brake pedal.
7. Connect the brake booster pushrod to the brake pedal.
8. Install the washer and retaining clip to the brake pedal.