VUE AWD V6-3.5L (2007)
3. Remove the plugs from the proportioning valve assembly ports.
4. Remove the caps or plugs from the master cylinder brake pipe ends.
5. Connect the master cylinder brake pipes to the proportioning valve assembly.
6. Tighten the brake pipe fittings at the proportioning valve assembly.
Tighten the fittings to 18 N.m (13 lb ft).
7. Remove the caps or plugs from the caliper and wheel cylinder brake pipe ends.
8. Connect the caliper and wheel cylinder brake pipes to the proportioning valve assembly.
9. Tighten the brake pipe fittings at the proportioning valve assembly.
Tighten the fittings to 18 N.m (13 lb ft).
10. Remove the shop towel and discard into an approved container.
11. Reposition the TCM if equipped to the bracket.
12. Bleed the hydraulic brake system.
