saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Camshaft Replacement - Left Side|Page 2891 > < Camshaft Drive Sprocket Replacement - Left Side|Page 2886
Page 1
background image

Camshaft: Service and Repair
Camshaft Replacement - Left Side

Camshaft Replacement - Left Side

Removal Procedure

1. Remove the battery.
2. Remove the battery tray.
3. Drain the engine coolant.
4. Remove the upper radiator hose.
5. Remove the exhaust gas recirculation (EGR) valve.
6. Remove the left rocker arm cover.
7. Remove the left camshaft drive sprocket.

8. Alternately loosen the rocker shaft retaining bolts a few turns at a time using the loosening sequence.
9. Remove the rocker arm and shaft assembly.

10. Remove the rear camshaft cap, bolts, and O-ring.
11. Remove the camshaft from the cylinder head.
12. Remove the camshaft seal.
13. Clean all of the bearing surfaces.
14. Clean all of the sealing surfaces.
15. Clean and inspect the camshafts.

Installation Procedure

Camshaft Replacement - Left Side|Page 2891 > < Camshaft Drive Sprocket Replacement - Left Side|Page 2886