VUE AWD V6-3.5L (2007)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer Replacement
Tools Required
EN 46337 Camshaft Sprocket/Crankshaft Balancer Holder
Removal Procedure
1. Remove the drive belt.
2. Remove the right front wheel.
Important: If the timing belt is to be removed, the crankshaft balancer must be rotated to position number 1 piston at top dead center
(TDC) of compression stroke to avoid valve-to-piston contact.
3. Turn the crankshaft so its white mark (1) lines up with the pointer (2).
4. Inspect for cylinder number 1 piston at TDC. The pointer on the upper cover (2) will be aligned with the number 1 cylinder TDC mark (1) on the
camshaft pulley.
