VUE AWD V6-3.5L (2007)
Timing Component Alignment Marks: Locations
Clean the belt sprockets and covers.
1. Rotate the crankshaft and align the top dead center (TDC) mark (2) on the sprocket (237) with the pointer on the oil pump housing (1).
2. Rotate the left camshaft sprocket to TDC by aligning the mark (2) on the sprocket with the pointer (1) on the cover.
3. Rotate the right camshaft sprocket to TDC by aligning the mark (2) on the sprocket with the pointer (1) on the cover.
4. Install the EN 46331. Screw the EN 46331 all the way in by hand, until the tool contacts the timing belt tensioner. Tighten until snug.
