VUE AWD V6-3.5L (2007)
3. Use SA9149AC-8 to install the field coil snap ring with the bevel side out.
Important: It is important to use Saturn Sealant P/N 22681632 as a thermal conductive material. Failure to use this sealant may affect
the function of the switch.
4. Clean the thermal switch pocket if necessary.
5. Apply thermal switch sealant, approximately the size of a pea, into the switch pocket.
6. Install the thermal switch by pushing the switch into place and wetting out the sealant, while holding the switch in place. Wipe away any excess
sealant.
Notice: Refer to Fastener Notice.
7. Install the thermal switch hold-down bracket and bolt.
Tighten the bolt to 6 N.m (53 lb in).
