VUE AWD V6-3.5L (2007)
Important: Any time an HVAC module mode actuator or the HVAC control module is replaced, the HVAC control module must be
calibrated to ensure proper air distribution.
8. Calibrate the mode door by simultaneously pushing the A/C and RECIRC buttons on the HVAC control module 3 times each, within 2 seconds of
initial push.
1. The A/C and RECIRC button LED's will flash while this calibration is taking place.
2. The calibration will take anywhere between 10-30 seconds depending on battery voltage.
3. The LED's will quit flashing when the calibration is complete.
9. Cycle the ignition and verify proper operation.
10. Refer to Control Module References for programming and setup information.
