VUE AWD V6-3.5L (2007)
3. Remove the strut to knuckle nuts and bolts. Discard the nuts and bolts.
4. If the strut has not been previously modified, perform the following procedure:
1. Disconnect the strut from the knuckle.
Important:
*
The strut mounting bracket consists of two layers of metal, file the inner layer no further than the slot in the outer layer.
*
If filing the strut, paint the exposed metal with primer.
If increasing negative camber, remove material from the outside of the lower strut hole.
2. If decreasing negative camber, remove material from the inside of the lower strut hole.
