VUE AWD V6-3.5L (2007)
1. Inspect the foam seal. If the seal is damaged, replace the seal using Kent Industries adhesive back foam tape P/N 46485 or equivalent.
2. Install the filter housing to the body.
Notice: Refer to Fastener Notice.
Important: New seal nuts must be used when installing passenger compartment air filter housing to prevent leaks.
3. Install the new seal nuts to the filter housing.
Tighten the nuts to 9 N.m (80 lb in).
4. Connect the washer nozzle hose to the washer nozzle.
5. Install the air filter access panel.
6. Install the push pins to the air filter access panel.