VUE AWD V6-3.5L (2007)
3. Connect the IP connectors (2)
Notice: Refer to Fastener Notice.
4. Tighten the bolts (1) on the top of the fuse block.
Tighten the underhood accessory wiring junction block harness retaining bolts (1) to 4 N.m (35 lb in).
5. Reconnect the positive battery cable and EPS at the end of the fuse block with the nut.
Tighten the positive battery cable nut to 17 N.m (13 lb ft).
6. Install the fuse box cover.
7. Connect the negative battery cable.