VUE AWD V6-3.5L (2007)
5. Insert the J 41545 as shown and rotate the PNP switch until the tool drops onto position.
Notice: Refer to Fastener Notice.
6. Tighten the PNP switch bolt and stud.
Tighten the bolt and stud to 20 N.m (15 lb ft).
7. Remove the alignment tool.
8. Install the transaxle range select lever (3) to the transaxle manual shaft (1).
9. Install the transaxle range select lever nut (2).
Tighten the nut to 35 N.m (26 lb ft).