VUE AWD V6-3.5L (2007)
Starter Motor: Service and Repair
Starter Motor Replacement (3.5L (L66))
Removal Procedure
Important: Record all pre-set radio stations.
1. Turn the ignition OFF.
2. Disconnect the negative battery cable.
3. Remove the B+ battery cable nut at starter.
4. Remove the S-terminal connector.
5. Remove the lower starter assembly to transmission bolt and oxygen sensor connector bracket.
6. Remove the upper starter assembly to transmission bolt.
7. Remove the starter.
Installation Procedure
1. Install the starter to the transmission.
Notice: Refer to Fastener Notice.
2. Install the starter mounting bolts.
Tighten the starter-to-transmission bolts to 44 N.m (33 lb ft).
3. Install the B+ cable and nut.