VUE AWD V6-3.5L (2007)
Fluid Pressure Sensor/Switch: Service and Repair
5AT - Automatic Transmission
4th Clutch Pressure Switch Replacement
4th Clutch Pressure Switch Replacement
Removal Procedure
1. Remove the battery tray.
2. Disconnect the wiring harness from the 4th clutch pressure switch.
3. Remove the 4th clutch pressure switch and washer.
Installation Procedure
Notice: Refer to Fastener Notice.
1. Install the 4th clutch pressure switch and washer.
Tighten the input speed sensor bolt to 20 N.m (14 lb ft).
2. Connect the wiring harness to the 4th clutch pressure switch.
3. Install the battery tray.
3rd Clutch Pressure Switch Replacement
