VUE AWD V6-3.5L (2007)
Mainshaft: Service and Repair
Mainshaft End Cover Replacement
Removal Procedure
1. Remove the left front wheel.
2. Remove the left front wheelhouse liner.
3. Remove the mainshaft end cover bolts (5).
4. Remove the mainshaft end cover (4) from the transmission.
5. Remove the mainshaft end cover seal (6) from the transmission and discard.
Installation Procedure
1. Install a new mainshaft end cover seal (6).
Notice: Refer to Fastener Notice.
2. Install the mainshaft end cover (4) to the transmission.
Tighten the mainshaft end cover bolts to 19 N.m (14 lb ft).
3. Install the left front wheelhouse liner.
4. Install the left front wheel.