VUE AWD V6-3.5L (2007)
Shift Cable: Service and Repair
4T45-E - Automatic Transaxle
Floor Shift Control Cable Replacement
Removal Procedure
1. If equipped with 2.4L (LAT), remove the battery tray.
2. Disconnect the shift control cable (3) from the range select lever (4).
3. Release the shift control cable retaining clip (2) and remove the cable from the shift control cable bracket (1).
4. Remove the left and right console trim panels.
5. Remove the shift control cable from the automatic transmission shift control.
6. Remove the shift control cable grommet at the cowl.
7. Remove the shift control cable from the vehicle.
Installation Procedure
1. Install the shift control cable to the vehicle through the cowl and the carpet.
2. Install the shift control cable grommet in the cowl.
