VUE AWD V6-3.5L (2007)
3. Install the shift control cable to the automatic transmission shift control.
4. Install the left and right console trim panels.
5. Install the shift control cable and retaining clip (2) to the shift control cable bracket (1).
6. Install the shift control cable (3) to the range select lever (4).
7. Adjust the cable.
1. Place the shift lever in N (Neutral). Rotate the selector shaft clockwise from P (Park) through R (Reverse) into N (Neutral).
2. With the shift control assembly in N (Neutral) lift the cable connector locking clip up.
3. Push the clip on the cable connector until fully seated and flush with cable body.
8. If equipped with 2.4L (LAT), install the battery tray.
