VUE AWD V6-3.5L (2007)
Differential Axle Housing: Service and Repair
Differential Housing Support Bushing Replacement
Tools Required
J 44866 Support Bushing Remover/Installer
Important: Remove the bushing only if damaged or worn out.
Important: Use the high pressure lube supplied with the tool.
1. Install J 44866. Tighten the nuts in order to force out the bushing.
Important: The bushing has 2 slots molded into the rubber section. The slots are used to control vibration and must be installed in the
following positions:
*
4-Cylinder Vehicles - Align the slots in the 3 o'clock and 9 o'clock position (2).
*
6-Cylinder Vehicles - Align the slots in the 6 o'clock and 12 o'clock position (1).
Install J 44866. Tighten the nuts in order to force the bushing in.