VUE AWD V6-3.5L (2007)
6. Install the range selector lever (1), 8 mm spring washer (2), 8 mm lock washer (3), and 8 mm locknut (4) on the manual shift shaft.
Tighten the 8 mm locknut to 12 N.m (8.7 lb ft).
7. Connect the shift cable to the transmission control lever and cable bracket.
8. Connect the park/neutral position switch harness connectors.
9. Install the range selective lever bolt and cover.
Tighten the bolt to 10 N.m (89 lb in).
10. Install the left splash shield.
11. Install the tire and wheel.
12. Lower the vehicle. Refer to Vehicle Lifting.
13. Verify the park/neutral position switch adjustment by starting the vehicle in all ranges. If the transmission starts in any ranger other than park or
neutral, readjust the park/neutral position switch.