VUE AWD V6-35L (2007) Wiper and Washer Systems: Windshield Washer Reservoir Repair
Important: Contain any solvent the may spill while removing pump and hoses.
7. Pull the washer solvent pump from the solvent container.
8. Disconnect the front and rear washer solvent hoses from the washer pump.
Installation Procedure
Important: Do not reuse washer solvent as debris may clog the system.
1. Connect the front and rear washer solvent hoses to the washer pump.
2. Install the washer pump into the washer solvent container. Ensure the washer pump filter is installed, if removed.
3. Connect the washer pump electrical connector.
4. Insert the front and rear washer solvent container hoses into the grooves in the solvent container.
Important: Washer solvent container grommet must be installed between container and body structure to prevent squeaks and rattles.
5. Install the washer solvent container into the motor compartment. Ensure that the washer solvent container's mounting peg, with grommet installed,
is seated into the mounting hole in the body structure. A lubricant may be used to ease installation.
6. Connect the front washer solvent container hose to front nozzle hose that runs along the upper motor compartment rail.
