VUE AWD V6-3.5L VIN 4 (2004)
3. Remove the battery by sliding the battery out of the battery clip. This may require a push from the back side of the clip.
4. Replace the battery with the new one making sure that the (+) side of the battery faces away from the circuit board.
5. Reassemble the circuit board and key pad, and replace them in the transmitter housing which does not contain the key pad openings.
IMPORTANT: Be careful not to pinch the key pad while closing the housing.
6. Line up and replace the lower housing by snapping the upper and lower housings together.
7. Test the operation of the transmitter with the vehicle by pressing and holding the LOCK and UNLOCK buttons for 7 or more seconds. This is
required to reestablish communications with the vehicle.
