VUE AWD V6-3.5L VIN 4 (2004)
Front Bumper Cover / Fascia: Service and Repair
Fascia Replacement - Front Bumper
Fascia Replacement - Front Bumper
Removal Procedure
1. Remove the front side marker lamps. Refer to Marker Lamp Replacement - Side in Lighting Systems.
2. Remove the headlamps. Refer to Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement in
Lighting Systems.
3. Remove the front air deflector. Refer to Air Deflector Replacement - Front Bumper Fascia (See: Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair) .
4. Remove the front wheelhouse liners. Refer to Wheelhouse Liner Replacement - Front (See: Fender/Front Fender/Front Fender Liner/Service and
Repair) in Body Front End.
5. Disconnect the fog lamp electrical connector (if equipped), by reaching through the headlamp opening.
6. Remove the fascia to lower front fender bracket bolts.
7. Remove the fascia to body push-in retainers.
8. Separate the fascia from the front fenders.
9. Remove the fascia to fascia support push-in retainers.
10. Remove the fascia from the vehicle.
Installation Procedure