VUE AWD V6-3.5L VIN 4 (2004)
Service Procedure:
1.
Put window in full up position.
2.
Remove retaining screw from center of inside handle pocket.
3.
Slide door handle forward and pull outward to expose lock rods.
4.
Using a thin bladed screwdriver, disengage lock rods from retaining clips.
5.
If equipped with power door locks, is connect electrical connector from switch by depressing retaining tabs.
6.
Gently pull at top end of door speaker cover to disengage attaching clips.
7.
Lift door speaker cover out from behind door trim panel.
8.
While holding door speaker cover, disengage speaker wiring harness from speaker, then remove door speaker cover.
9.
Remove the door trim panel screw located behind the speaker cover.
10.
On non-power windows, remove window crank handle.
