VUE AWD V6-3.5L VIN 4 (2004)
22.
Install fasteners located behind door trim pull handle.
Tighten
Tighten Door Trim Panel Fasteners to 2.5 N.m (22 in-lbs)
23.
Snap inside door pull handle escutcheon into place.
24.
On non-power windows, install window crank handle.
25.
Install the door trim panel fastener located behind the speaker cover.
Tighten
Tighten Door Trim Panel Fastener to 2.5 N.m (22 in-lbs)
26.
Connect speaker wiring harness to speaker.
27.
Position door speaker cover over door trim panel with speaker cover mounting tabs behind door trim panel.
28.
Gently push on door speaker cover to engage attaching clip.
29.
If equipped with power door locks, connect electrical connector to power door lock switch.
30.
Position inside handle to door trim and partially seat the rear tangs.
31.
Lift lock rods into retaining clips, secure rods into handle by latching clips over rods.
32.
Push handle into trim panel and slide rearward to fully engage tangs. Ensure the rods clear the water deflector.
33.
Install inside handle retaining screw in handle.
