VUE AWD V6-3.5L VIN 4 (2004)
Hood Shock / Support: Service and Repair
Hood Hold-Open Rod Replacement
Removal Procedure
Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle
or personal injury.
1. Open and support the hood.
2. Push the rod toward the engine and twist rod out of the bushing.
3. Remove rod from vehicle.
Installation Procedure
1. If removed, install bushing into upper tie bar.
2. Install rod by using rod end into bushing and twisting.
