VUE AWD V6-3.5L VIN 4 (2004)
4. Install the center pin of the garnish molding fastener.
5. Install the fastener cover to the garnish molding.
6. Install the height adjuster knob.
Notice: Refer to Fastener Notice in Cautions and Notices.
7. Install the shoulder belt assembly and fasteners.
Tighten the fasteners to 50 N.m (37 lb ft).
8. Press on the shoulder belt fastener cover until the cover snaps closed.
9. Ensure proper operation of the seat belt.
Garnish Molding Replacement - Lock Pillar Upper
Garnish Molding Replacement - Lock Pillar Upper
Removal Procedure
1. Unsnap the cover on the rear seat shoulder belt to expose the shoulder belt fastener.
2. Remove the shoulder belt fastener and the shoulder belt.
