VUE AWD V6-3.5L VIN 4 (2004)
1. Install the trim cover to the pad. Engage the hook and loop locations by pressing firmly.
2. Position the seat cushion cover and pad to the frame.
3. Tuck the seat cushion cover into the seat belt buckle opening.
4. Insert the anchor plates for the seat belt buckle through the cushion.
5. Attach the cushion cover retainers to the seat frame.
6. Pull on the drawstring and connect the drawstring retainer to the cushion frame.
Notice: Refer to Fastener Notice in Cautions and Notices.
7. Install the anchor bolts to the rear seat buckle.
Tighten the bolts to 50 N.m (37 lb ft).
8. Install the rear seat. Refer to Seat Replacement - Rear (See: Service and Repair/Seat Replacement - Rear) .
Seat Cushion Cover and Pad Replacement - Front
Seat Cushion Cover and Pad Replacement - Front
Removal Procedure