VUE AWD V6-3.5L VIN 4 (2004)
Brake Master Cylinder: Service and Repair
Master Cylinder Reservoir Replacement
Master Cylinder Reservoir Replacement
Removal Procedure
Caution: Refer to Brake Fluid Irritant Caution in Service Precautions.
Notice: When adding fluid to the brake master cylinder reservoir, use only Saturn P/N 21013073, or equivalent DOT-3 brake fluid from a clean,
sealed brake fluid container. The use of any type of fluid other than the recommended type of brake fluid, may cause contamination which could result
in damage to the internal rubber seals and/or rubber linings of hydraulic brake system components.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in Service Precautions.
1. Remove the brake fluid from the reservoir. Discard the fluid into an approved container.
2. Disconnect the brake fluid level sensor electrical connector.
3. Remove the brake fluid level sensor.
