VUE AWD V6-3.5L VIN 4 (2004)
Camshaft Oil Seal: Service and Repair
Camshaft Oil Seal Replacement
Removal Procedure
1. Remove the appropriate camshaft sprocket.
2. Remove the camshaft cover and bolts.
3. Remove the camshaft oil seal using a flat-bladed tool.
Installation Procedure
1. Use the EN 46334 to install the seal (223) into the cylinder head. Rotate the bolt clockwise until the tool bottoms in the cylinder head bore.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the cover, NEW seal, and bolts.
^
Tighten the bolts to 22 Nm (16 ft. lbs.).
3. Install the camshaft sprocket.