VUE AWD V6-3.5L VIN 4 (2004)
9. Install a new exhaust manifold gasket onto the exhaust manifold flange studs.
10. Position the exhaust manifold pipe onto the exhaust manifold studs and install the exhaust manifold nuts.
^
Tighten the exhaust manifold pipe-to-exhaust manifold nuts L61 to 42 Nm (31 ft. lbs.).
11. Lower the vehicle.
12. Install the exhaust manifold heat shield.
13. Install the exhaust manifold heat shield bolts.
^
Tighten the exhaust manifold heat shield bolts L61 to 23 Nm (17 ft. lbs.).
14. Install the outlet resonator/duct assembly into position.
15. Connect the PVC fresh air vent hose assembly.
16. Tighten the clamp at the throttle body assembly.
17. Position the outlet resonator/duct assembly up with the support bracket and install the push-pin.
18. Tighten the air cleaner assembly.
19. Connect the Intake Air Temperature (IAT) sensor connector.
