VUE AWD V6-3.5L VIN 4 (2004)
Air Duct: Service and Repair
DEFROSTER DUCT REPLACEMENT - WINDSHIELD
REMOVAL PROCEDURE
1. Remove the instrument panel upper trim panel.
2. Remove the windshield defrost duct nuts from the HVAC module.
3. Remove the windshield defrost duct from the HVAC module.
INSTALLATION PROCEDURE
1. Inspect the windshield defrost duct seals. If damaged replace using Kent Industries adhesive back foam tape P/N 46485 or equivalent.
2. Install the windshield defrost duct to the HVAC module.
3. Install the windshield defrost duct nuts to the HVAC module.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the nuts to 2.5 N.m (22 lb in).