VUE AWD V6-3.5L VIN 4 (2004)
Compressor Thermal Protection Switch: Service and Repair
COMPRESSOR THERMAL PROTECTION SWITCH REPLACEMENT
TOOLS REQUIRED
J 44020 Terminal Repair Kit
REMOVAL PROCEDURE
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Cut the wire harness leads to the clutch coil.
3. Remove the electrical connector from the clutch coil bracket.
4. Remove the thermal protection switch (TPS) retainer bolt from the compressor.
5. Remove the TPS retainer from the compressor.
6. Remove the TPS assembly from the compressor. It may be necessary to gently pry the TPS with a flat bladed tool.
