VUE AWD V6-3.5L VIN 4 (2004)
9. Remove the liquid line from the TXV.
10. Remove the nut retaining the liquid line to the strut tower.
11. Remove the nut retaining the liquid line to the strut tower.
12. Remove the liquid line nut from the receiver dehydrator.
13. Remove the liquid line from the receiver dehydrator.
14. Lift the rear portion of the liquid line upward and remove the liquid line from the vehicle.
15. Remove and discard the sealing washer from the liquid line.
16. Install protective caps to the receiver dehydrator and the TXV to prevent contamination and desiccant saturation.
INSTALLATION PROCEDURE
1. Remove the protective caps from the receiver dehydrator and the liquid line.
2. Install the new sealing washer to the receiver dehydrator.
3. Route the receiver dehydrator end of the liquid line into position.
