VUE AWD V6-3.5L VIN 4 (2004)
4. Install the liquid line to the receiver dehydrator.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Use a large pair of pliers to hold the fitting while tightening the nut. Be careful not to twist the line.
5. Install the liquid line nut to the receiver dehydrator.
Tighten the nut to 16 N.m (12 lb ft).
6. Carefully reposition the ABS brake modulator assembly to the modulator bracket, if equipped.
7. Tighten the brake modulator assembly nuts to the ABS modulator bracket, if equipped.
Tighten the nut to 20 N.m (15 lb ft).
