VUE AWD V6-3.5L VIN 4 (2004)
34. Remove the HVAC module bolts from the right side of the cross car beam.
35. Remove the HVAC module nut from the center of the cross car beam.
36. Remove HVAC module bolt from the left side of the cross car beam.
37. Remove the HVAC module from the vehicle.
INSTALLATION PROCEDURE
1. Inspect the front of dash seal for proper alignment.
IMPORTANT: Make sure the HVAC module seals are flush and even as they meet their mating surfaces. This will reduce the chance of leaks and
ensure proper fit.
2. Inspect the seal mating surfaces to ensure there are no obstructions.
3. Loose hang the HVAC module from the cross car beam.
IMPORTANT: Make sure the plastic molded in bracket at the center of the HVAC module is forward of the cross car beam during installation.
