VUE AWD V6-3.5L VIN 4 (2004)
Coolant Line/Hose: Service and Repair
Throttle Body Heater Hose Replacement - Inlet
Throttle Body Heater Hose Replacement- Inlet
Removal Procedure
1. Remove the throttle body air inlet duct.
2. Drain the cooling system.
3. Remove the throttle body inlet hose clamp and the hose from the coolant pipe.
4. Remove the throttle body inlet hose clamp and the hose from the throttle body and the vehicle.
Installation Procedure
1. Install the throttle body inlet hose and the hose clamp to the throttle body.
2. Install the throttle body inlet hose and the hose clamp to the coolant pipe.
3. Install the throttle body air inlet duct.
4. Fill the cooling system.
5. Inspect for leaks.
