VUE AWD V6-3.5L VIN 4 (2004)
8. Remove the evaporator outlet hose nut from the cowl.
9. Remove the evaporator outlet hose nut from the TXV.
10. Remove the evaporator outlet hose from the TXV.
11. Install a protective cap to the TXV to prevent contamination and desiccant saturation.
12. Remove and discard the seal washer from the evaporator outlet hose.
INSTALLATION PROCEDURE
1. Install a new seal washer to the evaporator outlet hose.
2. Remove the protective cap from the TXV.
3. Install the evaporator outlet hose to the TXV.
4. Install the evaporator outlet hose nut to the TXV.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the nut to 16 N.m (12 lb ft).
