VUE AWD V6-3.5L VIN 4 (2004)
Fuel Tank Pressure Sensor: All Technical Service Bulletins
Engine Controls - SES Lamp ON/DTC P0453 Set
Bulletin No.: 04-06-04-052
Date: July 01, 2004
TECHNICAL
Subject:
Service Engine Soon (SES) Telltale with Diagnostic Trouble Code (DTC) P0453 Stored in the Powertrain Control Module (PCM) (Recalibrate the
PCM)
Models:
2004 Saturn VUE Vehicles
with 3.5L V-6 Engine (VIN 4 - RPO L66)
Attention:
Technician
Condition
Some customers may comment on an SES telltale illuminated with DTC P0453 - Fuel Tank Pressure Sensor stored in PCM.
Cause
This condition may be caused by the current PCM calibration.
Correction
Reprogram the PCM with the new calibration available on Saturn Service Stall System (SSS) version TIS 06/2004 or greater and re-evaluate the vehicle
following the service procedure in this bulletin.
Service Procedure
Important:
Before installing new PCM calibration, make sure the Saturn Service Stall System (SSS) version is TIS 06/2004 or greater.
Important:
While ignition is OFF, apply parking brake to disable daytime running lights (DRL) prior to starting reprogramming procedure.
Important:
Technician must select "Replace and Re-program" option in order to re-calibrate the vehicle. (Calibration I.D. Number 12594438 or later)
Reprogram the PCM with the updated calibration identified in SSS version TIS 06/2004 or greater for the 3.5L (RPO L66) engine. Refer to the Saturn
Programming System (SPS) in the Vehicle Controls Systems section of the 2004 Saturn VUE Service Manual Vol. 2 for reprogramming procedures.
Claim Information
To receive credit for this repair during the applicable 8 year/80,000 mile (130,000 kilometers) emission controller warranty coverage period, submit a
claim through the Saturn Dealer System for J6353 (EE-Prog Reprogramming) [Install new PCM calibration].
Disclaimer
