VUE AWD V6-3.5L VIN 4 (2004)
Intake Air Temperature (IAT) Sensor: Service and Repair
Intake Air Temperature (IAT) Sensor 1 Replacement
INTAKE AIR TEMPERATURE (IAT) SENSOR 1 REPLACEMENT
REMOVAL PROCEDURE
1. Turn the ignition OFF.
2. Disconnect the IAT sensor harness connector.
3. Remove the IAT sensor by pulling it out of the air cleaner housing.
INSTALLATION PROCEDURE
1. Install the IAT sensor with a new O-ring.
2. Connect the IAT sensor harness connector. Push in the connector until a click is heard, then pull back to confirm a positive engagement.
