VUE AWD V6-3.5L VIN 4 (2004)
3. Remove the bank 2 heated oxygen sensor 1 using the J 39194-C.
INSTALLATION PROCEDURE
1. Apply a small amount of the anti-seize compound SA P/N 21485279, or equivalent, to the threads of the heated oxygen sensor.
2. Install the bank 2 heated oxygen sensor 1 using the J 39194-C.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the oxygen sensors (exhaust manifold) to 44 N.m (33 lb ft).
