VUE AWD V6-3.5L VIN 4 (2004)
Fuel: Service and Repair
FUEL SYSTEM CLEANING
IMPORTANT: If the fuel filter is plugged, the fuel tank should be inspected internally and cleaned if necessary.
1. Remove the fuel tank.
2. Remove the fuel pump module assemblies.
3. Inspect the fuel pump module strainer. Replace the pump module assembly if the fuel strainer is contaminated.
4. Flush the fuel tank with hot water.
IMPORTANT: When flushing the fuel tank, handle the fuel and water mixture as a hazardous material. Handle the fuel and water in accordance with
all applicable local, state, and federal laws and regulations.
5. Pour the water out of the fuel sender assembly opening in the fuel tank. Rock the fuel tank in order to be sure that the removal of the water from
the fuel tank is complete.
6. Allow the tank to dry completely before reassembly.
7. Disconnect the fuel feed pipe at the engine fuel rail.
8. Clean the fuel pipes by applying air pressure in the opposite direction of the fuel flow.
IMPORTANT: Only use oil-free compressed air to blow out the fuel pipes.
9. Connect the fuel feed pipe to the engine fuel rail.
10. Install the fuel pump module assemblies.
11. Install the fuel tank.
